print this page Send this page to the printer   Back to the site
CableTrellis : Greenway Trellis™

The Free Standing Greenway® Trellis.

This freestanding, one size, trellis panel kit is made from 1-1/2" diameter powder coated aluminum tubing. The pre-cut tubing sections easily sleeve together and are secured with locking screws. The legs can either be set in compacted gravel or concrete footings, or they can be trimmed and fitted with optional surface mount base plates. Four prefabricated 1/8" diameter stainless steel cables with adjustable threaded end fittings are strung vertically on the frame, and they support four 1/8" diameter stainless steel rods that are attached horizontally using Cross-clamps with locking set screws.

The rods may be positioned anywhere along the cables, but the spacing that we show and recommend is 11-1/4 inch centers. Additional rods and clamps can be purchased as accessory items. Multiple trellis kits can be combined in a variety of ways to create any effect you desire.

The tubular frames on the Greenway® trellis come in a durable powder coated finish. The cables and rods are manufactured from high grade, type 316 stainless steel for weather-tough strength and durability. Cross-clamps are available in either hard anodized aluminum or stainless steel and come with colored plastic end caps to cover the set screw. Stainless end caps are also available as an optional accessory item.


Greenway Trellis(TM)Roll your mouse over a number at right to see details.








Each Greenway® trellis kit includes the following:

• 1 qty 1-1/2” diameter tubular aluminum frame with durable powder coated finish. Frame comes in 4 sections that slip together with splice sleeves and locking screws (included). Installed dimensions are 6’ high x 43” wide.
• 4 qty 1/8” diameter stainless steel cable assemblies (prefabricated to exact length) with attachment fittings and colored plastic end caps.
• 4 qty 1/8” diameter x 38” long stainless steel rods.
• 16 qty cross-clamps with colored plastic caps (choose either hard anodized aluminum or stainless steel cross-clamps)
• 1 qty 3/16” hex key wrench (for cross-clamp set screws).
• 1 qty square drive bit (for frame locking screws).
• Installation instructions.

Note: the above trellis is designed to have the legs set in compacted gravel or concrete footings. To convert to surface mounting, please order 1 Base Plate Kit and 6 attachment bolts (kit & bolts sold separately).

Select your frame color option by adding BLK (black), BRZ (bronze), CRM (cream), GRY (gray), GRN (green), SLV (silver), TAU (taupe) or WHT (white) after the part #.
Part # Cross-Clamp Type Price
8506B- Hard anodized alum Call for Prices
8506S- Stainless steel Call for Prices

Detail of top tube section connecting to vertical tube section.

The tubular frames come in 4 sections that are easily sleeved together and secured with locking screws (provided). Detail of bottom horizontal tube section connecting to vertical tube section.

Trellis legs can either be set in compacted gravel or concrete footings or they can be trimmed and fitted with optional surface mount base plates (sold separately).


Compacted gravel or concrete.